LADION BUILDERS (Philippines)

LADION HOME BUILDERS SUPPLY & SERVICES 
Roofing and Ceiling Services (Installer, Dealer, Contractor, Fabricator, Supplier) 
Please translate your own language (please see buttom page)

ROOFING

ROYAL MEDITERRANEAN

« Back to Album Photo 7 of 7 Previous | Next
ROYAL MEDITERRANEAN
General Information Substrate : Cold Rolled Steel Complying JIS G 3141 SPCC Coated with Galfan the eutectic mixture of zinc and aluminum (95/5),complying to ISO 14788, commercial quality Nominal Thickness Available : 0.4, 0.5, 0.6 mm Tensile Strenght : 40,000 psi or 275 Mpa (Minimum) Nominal Width : 1.070m Effective coverage: 0.995m Paint Coating System: 1. Conversion Coating 2. Primer Coat 3. Top Coat 4.Wash Coat Service The Pain is oil free polyester, oven baked to achieve full curing to satisfy the requirement of both PNS JIS Standards Standard Coating : Top Coat - 5 - 18 Microns, Primer Coat - 5 - 7 Microns, Service Coat - 5 - 7 Microns Installation Procedure For quality finished result installation, ensure that faces of all steel or wood purlins are in one plane and levelled . It is recommended that the laying of panels start on the opposite direction of prevailing moonsoon wind. Installed roofing panels and accessories should be cleaned from metal filings, rivet shanks,nails, screw, nuts and other metallic particles. Handling and Storage Panels and Accessories should be piled over wooden support at least 100mm from the ground level and with a minimum inclination of 10 degree. Sheets can be transferred from the staging area to roof work area by hand one at a time using nylon rope or G.I. guide wire. To preserve the finish surface and for personal safety, sheet should be handled wearing clean dry gloves as much as possible
Posted by Rigel Vere Ladion on November 13, 2011 Full Size| Slideshow

Post a Comment

Oops!

Oops, you forgot something.

Oops!

The words you entered did not match the given text. Please try again.

Already a member? Sign In

0 Comments